Thursday 26 July 2012

What a Difference a Base Makes...

A few days ago I showed you all a 54mm Pegaso Ninja I painted, check it out now:


When models are intended purely for display it helps to make a presentation base for them to increase the visual impact of the work. Recently I had been getting curious about the Voodooworx range of resin display bases. Decent spread of sizes and acceptable prices. I got a 40mm round and a 40mm cube to check out.


The plinths (and isn't "plinth" a word that wants to be dirty but isn't?) come in a beautifully cast grey resin. There aren't any bubbles, voids or casting blocks. You can even see where Voodooworx sand down the bases to make them ready for instant usage.


I wanted to use a plain black base with the Kanji for Ninja. I used the computer to create a perfect 40mm square and then fit the Kanji into the centre of it. Printing out the design allowed me to flip it over and block in the design in graphite (pencil). The block was primed black and then the design masking taped to the block.


A quick rub with pencil over the top transferred the design to the block in a faint graphite shadow.


Once the design was transferred, the paper was removed and the design carefully painted in with Mithril Silver. Annoyingly the camera saw more of the black through the silver than is actually there, the design is solid silver.


Before I primed the block I laid down a masking tape shape of where the base of the model touches the surface it is placed on. That made sure that the glued join between the base and the model was strongest.


Glue is only as strong as the surface it is applied to, if you try and stick parts to a painted surface then you are only getting the strength of adhesion that the paint has. Not much in other words, I superglued the Ninja to the resin base.


I had previously test-fitted the Ninja to the block to ensure the alignment would look good.


And there you have it, a display miniature rather than a wargaming mini. It just finishes off the look and creates another source of visual interest with the Kanji. I can heartily recommend the Voodooworx plinths for this kind of work. The only problem would be if you wanted a wooden effect base as these resin ones only work for solid colour. Until next time.

TTFN

2 comments:

  1. Excellent stuff there.. been looking for a cheap but good quality display stands for a while now. Will be picking some up for my models in no time then.

    Cheers for this.

    ReplyDelete
  2. Really nice piece, and thanks for posting the process for getting the kanji done. That's a great tip.

    ReplyDelete